Réparez vos affaires Communauté Boutique

Procedura di apertura Google Pixel 3 XL

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 12 tutoriels qui comprennent cette étape.

Retourner au tutoriel
Anglais
Italien
Étape suivante

Traduction de l’étape 1

Étape 1
Google Pixel 3 XL Opening Procedure, Heat the edge of the back cover: étape 0, image 1 de 3 Google Pixel 3 XL Opening Procedure, Heat the edge of the back cover: étape 0, image 2 de 3 Google Pixel 3 XL Opening Procedure, Heat the edge of the back cover: étape 0, image 3 de 3
Heat the edge of the back cover

  • Heat an iOpener and apply it to the right edge of the back cover for a minute.

  • A hair dryer, heat gun, or hot plate may also be used, but be careful not to overheat the phone—the display and internal battery are both susceptible to heat damage.

  • While you wait, note the following areas on the back cover:

  • Strong adhesive—there are large patches of adhesive near the bottom of the phone.

  • Fingerprint sensor cable—be careful not to slice through the cable as you pry

Scalda il bordo del pannello posteriore

Scalda un iOpener e applicalo sul bordo destro del pannello posteriore per un minuto.

Puoi usare anche un asciugacapelli, una pistola termica o una piastra riscaldata, ma stai attento a non surriscaldare il telefono: sia lo schermo sia la batteria interna possono essere danneggiati da un eccesso di calore.

Mentre aspetti, prendi nota delle aree seguenti del pannello posteriore:

Adesivo tenace: ci sono aree di adesivo molto estese vicino alla parte inferiore del telefono.

Sensore cavo impronte digitali: stai attento a non tagliare il cavo mentre fai leva.

-[title] Heat the edge of the back panel
-[* black] [guide|25705|Heat an iOpener|new_window=true] and apply it to the right edge of the back panel for a minute.
+[title] Heat the edge of the back cover
+[* black] [guide|25705|Heat an iOpener|new_window=true] and apply it to the right edge of the back cover for a minute.
[* icon_note] A hair dryer, heat gun, or hot plate may also be used, but be careful not to overheat the phone—the display and internal battery are both susceptible to heat damage.
-[* black] While you wait, note the following areas on the back panel:
+[* black] While you wait, note the following areas on the back cover:
[* red] Strong adhesive—there are large patches of adhesive near the bottom of the phone.
[* orange] Fingerprint sensor cable—be careful not to slice through the cable as you pry

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.