Réparez vos affaires Communauté Boutique

三星Samsung Galaxy S20 Ultra 后盖拆除教程

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 17 tutoriels qui comprennent cette étape.

Retourner au tutoriel
Anglais
Chinois
Étape précédente Étape suivante

Traduction de l’étape 2

Étape 2
Samsung Galaxy S20 Ultra Back Cover Removal, Separate the bottom edge adhesive: étape 0, image 1 de 3 Samsung Galaxy S20 Ultra Back Cover Removal, Separate the bottom edge adhesive: étape 0, image 2 de 3 Samsung Galaxy S20 Ultra Back Cover Removal, Separate the bottom edge adhesive: étape 0, image 3 de 3
Separate the bottom edge adhesive

  • Apply a suction cup to the back of the phone, as close to the center of the bottom edge as possible.

  • If the back cover is badly cracked, covering it with a layer of clear packing tape may allow the suction cup to adhere. Alternatively, very strong tape may be used instead of the suction cup. If all else fails, you can superglue the suction cup to the broken cover.

  • Pull on the suction cup with strong, steady force to create a gap between the back cover and the frame.

  • Insert the point of an opening pick into the gap.

  • Due to tight tolerances, this may take multiple attempts of reheating with the iOpener and separating with the suction cup before you get it right.

  • If you are having trouble creating a gap, apply more heat to the edge and try again.

  • Do not apply excessive force with the pick, or you risk cracking the back cover glass.

分离底部边缘粘合剂

在手机背面尽可能靠近底部边缘的中心处放置吸盘。

如果显示屏严重破裂，请用透明的包装胶带覆盖吸盘，以免吸盘粘附。或者，可以使用非常坚固的胶带代替吸盘。如果所有其他方法都失败了，则可以将吸盘用胶水粘在破裂的屏幕上。

用强大而稳定的力拉动吸盘，以在后盖和框架之间形成一个间隙，

将开口的尖端插入间隙中。

要达到严格的公差，可能需要多次尝试使用iOpener再次加热并用吸盘将其分开，然后再正确安装。

如果在创建缝隙时遇到困难，请在边缘上施加更多的热量，然后重试。

请勿施加过大的力量，否则可能会导致后盖玻璃破裂。

[title] Separate the bottom edge adhesive
[* black] Apply a suction cup to the back of the phone, as close to the center of the bottom edge as possible.
- [* icon_note] If your display is badly cracked, covering it with a layer of clear packing tape may allow the suction cup to adhere. Alternatively, very strong tape may be used instead of the suction cup. If all else fails, you can superglue the suction cup to the broken screen.
+ [* icon_note] If the back cover is badly cracked, covering it with a layer of clear packing tape may allow the suction cup to adhere. Alternatively, very strong tape may be used instead of the suction cup. If all else fails, you can superglue the suction cup to the broken cover.
[* black] Pull on the suction cup with strong, steady force to create a gap between the back cover and the frame.
[* black] Insert the point of an opening pick into the gap.
[* icon_note] Due to tight tolerances, this may take multiple attempts of reheating with the iOpener and separating with the suction cup before you get it right.
[* icon_note] If you are having trouble creating a gap, apply more heat to the edge and try again.
[* icon_caution] Do not apply excessive force with the pick, or you risk cracking the back cover glass.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.