Aller au contenu principal

Extracción de la tapa trasera de Samsung Galaxy S20 Ultra

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 17 tutoriels qui comprennent cette étape.

Anglais
Espagnol

Traduction de l’étape 10

Étape 10
Samsung Galaxy S20 Ultra Back Cover Removal, Separate the right edge adhesive: étape 0, image 1 de 3 Samsung Galaxy S20 Ultra Back Cover Removal, Separate the right edge adhesive: étape 0, image 2 de 3 Samsung Galaxy S20 Ultra Back Cover Removal, Separate the right edge adhesive: étape 0, image 3 de 3
Separate the right edge adhesive
  • Apply a suction cup to the back of the phone, as close to the center of the right edge as possible.

  • Pull on the suction cup with strong, steady force to create a gap between the back cover and the frame.

  • Insert the point of an opening pick into the gap.

  • Like with the previous edge, you will need to tilt the opening pick downward to fully insert it underneath the back cover.

Aplica una ventosa en la parte posterior del teléfono, lo más cerca posible del centro del borde derecho.

Tira de la ventosa con una fuerza fuerte y constante para crear un hueco entre la tapa trasera y el marco.

Inserta la punta de una púa de apertura en la ranura.

Al igual que con la , tendrás que inclinar la púa de apertura hacia abajo para insertarlo completamente debajo de la tapa trasera.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.