Aller au contenu principal

Washing Machine Switch Replacement (fix control board)

Anglais
Néerlandais

Traduction de l’étape 5

Étape 5
Washing Machine Switch Replacement (fix control board), Unplug and slide top back: étape 0, image 1 de 1
Unplug and slide top back
  • Unplug the washing machine.

  • Remove the three screws at the back that hold the top on. Note: There are extra holes on either side of the outside screws. You may want to mark the hole that has the screw with a pencil or piece of tape.

  • Slide the top towards the rear about 1/2-1"

  • Raise the front edge of the top a few inches and slide the top back another 3-4". You should be able to find a position where the top lies flat on the washer.

Insérez ici votre traduction

Insérez ici votre traduction

Insérez ici votre traduction

Insérez ici votre traduction

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.