Aller au contenu principal

Washing Machine Switch Replacement (fix control board)

Anglais
Néerlandais

Traduction de l’étape 16

Étape 16
Aucune image
Reinstall everything
  • Reinstall all the wiring to the control panel and compare it to your picture to make sure it's right.

  • Go in reverse order to put the rest of the washing machine back together.

  • Note: When I was done I plugged in the washing machine and all the buttons worked (and there was much rejoicing).

  • The next day my wife tried to do a load of wash. She said it wasn't filling with water and sounded different so she unplugged it.

  • Hours later, when I got home, I plugged it back in. It knew it lost power without finishing the cycle so it tried to drain the water (no water to drain) and then unlocked the door.

  • I did a load of wash and it worked fine. Not sure if there was a problem or she was confused and unplugged it when it was working. Don't see how changing switches would cause it to act funny.

  • Either way it works fine now. We've done dozens of loads with out a problems.

  • Good luck.

Insérez ici votre traduction

Insérez ici votre traduction

Insérez ici votre traduction

Insérez ici votre traduction

Insérez ici votre traduction

Insérez ici votre traduction

Insérez ici votre traduction

Insérez ici votre traduction

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.