Aller au contenu principal

Revive a GeoBlade 500 Battery Pack that is Not Charging

Anglais
Français

Traduction de l’étape 3

Étape 3
Revive a  GeoBlade 500 Battery Pack that is Not Charging, Use the Proper Protective Equipement: étape 0, image 1 de 3 Revive a  GeoBlade 500 Battery Pack that is Not Charging, Use the Proper Protective Equipement: étape 0, image 2 de 3 Revive a  GeoBlade 500 Battery Pack that is Not Charging, Use the Proper Protective Equipement: étape 0, image 3 de 3
Use the Proper Protective Equipement
  • Use an Electrostatic Discharge mat to prevent damage to the electronics because we will be opening up the battery pack case.

  • Properly ground yourself by plugging the snap connector to the ground of your outlet and placing the wristband around your wrist.

  • Be sure to use proper protective equipment for handling Lithium batteries, for example rubber insulated gloves and a face shield are recommended.

  • Ensure to do the following steps in an area where you are prepared to handle a battery fire if it occurs.

Insérez ici votre traduction

Insérez ici votre traduction

Insérez ici votre traduction

Insérez ici votre traduction

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.