Revive a GeoBlade 500 Battery Pack that is Not Charging

Retourner au tutoriel

Anglais

Français

Étape précédente Étape suivante

Traduction de l’étape 8

Étape 8

Revive a GeoBlade 500 Battery Pack that is Not Charging, Charge to 24V Using 2A Until the Amperage Decreases to 100mA: étape 0, image 1 de 3

Revive a GeoBlade 500 Battery Pack that is Not Charging, Charge to 24V Using 2A Until the Amperage Decreases to 100mA: étape 0, image 2 de 3

Revive a GeoBlade 500 Battery Pack that is Not Charging, Charge to 24V Using 2A Until the Amperage Decreases to 100mA: étape 0, image 3 de 3

Charge to 24V Using 2A Until the Amperage Decreases to 100mA

Witness the Power Supply amperage displaying the maximum of 2A initially, but then slowly plateau to ~ 100mA.
When the amperage reaches ~100mA, it is safe to increase the voltage described in the next step.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.