Aller au contenu principal

Xbox Series S Gehäuse ersetzen

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 8 tutoriels qui comprennent cette étape.

Anglais
Allemand

Traduction de l’étape 2

Étape 2
Xbox Series S Plastic Case Replacement, Remove the back panel screws: étape 0, image 1 de 1
Remove the back panel screws
  • Use a T8 Torx driver to remove the two 10 mm-long screws securing the back panel to the bottom panel.

  • Throughout this repair, keep track of each screw and make sure it goes back exactly where it came from.

Entferne die beiden 10 mm Torx T8 Schrauben, die die Gehäuserückseite an der Unterseite fixieren.

Achte darauf, dass du deine Schrauben geordnet hältst und sie alle wieder an die richtige Stelle zurückkommen.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.