Aller au contenu principal

Xbox Series S プラスチックケースの交換

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 8 tutoriels qui comprennent cette étape.

Anglais
Japonais

Traduction de l’étape 5

Étape 5
Xbox Series S Plastic Case Replacement, Remove the plastic case: étape 0, image 1 de 3 Xbox Series S Plastic Case Replacement, Remove the plastic case: étape 0, image 2 de 3 Xbox Series S Plastic Case Replacement, Remove the plastic case: étape 0, image 3 de 3
Remove the plastic case
  • With the bottom of the Xbox facing you, pull the two bottom-rear corners of the plastic case away from each other.

  • As you pull the corners apart, slide the back panel towards the bottom of the device. This releases the back panel from the plastic case.

  • The back panel should now settle on top of the clips on the back of the plastic case.

  • The back panel is permanently attached to the aluminum chassis.

  • Do not attempt to fully remove the chassis from the plastic case with this technique. You may risk breaking your case.

Xboxの底面を手前に配置して、プラスチックケース下部の背面側コーナー両側を持ち上げます。

コーナーが外れたら、バックパネルをデバイスの底面に向けてスライドします。この作業によりプラスチックケースからバックパネルを取り出せます。

これでプラスチックケース背面側に付いているクリップがバックパネルを固定しています。

バックパネルはアルミのシャーシに取り付けられているため、取り外せません。

この作業中、プラスチックケースからシャーシを完全に外さないでください。ケースを破損することがあります。

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.