Aller au contenu principal

Xbox Series X バックパネルの交換

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 27 tutoriels qui comprennent cette étape.

Anglais
Japonais

Traduction de l’étape 3

Étape 3
Xbox Series X Back Panel Replacement, Remove the back panel screws: étape 0, image 1 de 1
Remove the back panel screws
  • Use a T8 Torx driver to remove the two 7.4 mm‑long screws securing the back panel.

  • Throughout this repair, keep track of each screw and make sure it goes back exactly where it came from to avoid damaging your console.

T8トルクスドライバーを使って、バックパネルを固定している、長さ7.4mmのネジを2本外します。

この修理作業中、各ネジの装着場所をメモ書きしておきましょう。コンソールを破損しないように、正しい位置にネジを戻してください。

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.