Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 27 tutoriels qui comprennent cette étape.
Traduction de l’étape 5
Étape 5
-
Insert the flat end of a spudger into the gap between the back panel and the shell, near the right side of the base.
-
Pry up the back panel to release it from the locking clips.
| [* black] Insert the flat end of a spudger into the gap between the back panel and the shell, near the right side of the base. | |
| - | [* black] |
| + | [* black] Pry up the back panel to release it from the locking clips. |
Vos contributions sont faites dans le cadre de la licence open source Creative Commons.