Aller au contenu principal

Xbox Series X 中心机箱组件更换

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 17 tutoriels qui comprennent cette étape.

Anglais
Chinois

Traduction de l’étape 2

Étape 2
Xbox Series X Center Chassis Assembly Replacement: étape 0, image 1 de 2 Xbox Series X Center Chassis Assembly Replacement: étape 0, image 2 de 2
  • Use a pair of tweezers to pull up on the black plastic pull tab to disconnect the USB port cable.

  • Pull only on the pull tab, not the cable itself.

  • If the USB port cable feels adhered to the metal chassis, use an apply an iOpener or hair dryer to heat the cable. Depending on your model of Xbox, you may also need to slide an opening pick under the cable to separate the adhesive.

用一把镊子拉起黑色塑料拉片,从中心机箱上取下 USB 端口电缆。

只拉拉片,而不是电缆本身。

-[* black] Use a pair of tweezers to pull up on the black plastic pull tab to remove the USB port cable from the center chassis.
+[* black] Use a pair of tweezers to pull up on the black plastic pull tab to disconnect the USB port cable.
[* icon_caution] Pull only on the pull tab, not the cable itself.
+ [* icon_note] If the USB port cable feels adhered to the metal chassis, use an [guide|11677|apply an iOpener|new_window=true] or [guide|157348|hair dryer|new_window=true] to heat the cable. Depending on your model of Xbox, you may also need to slide an opening pick under the cable to separate the adhesive.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.