Autosampler Battery and Node Enclosure Assembly (2021)

Anglais

Français

Traduction de l’étape 10

Étape 10

Attach the Battery Wire to the Board

Take the two wires from the 2-pin female amphenol battery box connector and screw them into the board.
Screw the red power wire into the topmost terminal on the bottom 6-pin connector.
Screw the black ground wire into the terminal directly below the red wire.
Ensure that the exposed copper portions of the wire are secure and do not touch.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.