Traduction de l’étape 8
Étape 8
Feed Wires Through the Node Box
-
Pull the battery connection wires that go to the 2-pin amphenol battery box connectors through the middle port.
-
Pull the battery connection wires that go to the 2-pin amphenol autosampler batter connector through the bottom port.
-
Pull only the portion of the autosampler wires through the top port that has the signal wires (e.g. the bottle count and pulses).
-
Twist the outer side of the port down until it fits snuggly around the wire.
Vos contributions sont faites dans le cadre de la licence open source Creative Commons.