Dell Latitude E7440 Hard Drive Cable Replacement

Anglais

Français

Traduction de l’étape 1

Étape 1

Remove the original HD cable

EET owners: Your kit has this bit. No purchase needed.
If your E7440 is missing the caddy or bumpers, these parts can be safely omitted if an SSD is installed. If your unit is complete, remove the 4 screws marked in red. These screws are Phillips #0 if your laptop has them.
Pull the tab on the drive cable up to disconnect it from the motherboard.
Deroute the hard drive cable from the system.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.