Réparez vos affaires Communauté Boutique

Pixel 8 Pro Antennenkabel abtrennen

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 3 tutoriels qui comprennent cette étape.

Retourner au tutoriel
Anglais
Allemand

Traduction de l’étape 1

Étape 1
Pixel 8 Pro Pixel 8 Pro Antenna Cable Disconnect, Disconnect the antenna cable: étape 0, image 1 de 3 Pixel 8 Pro Pixel 8 Pro Antenna Cable Disconnect, Disconnect the antenna cable: étape 0, image 2 de 3 Pixel 8 Pro Pixel 8 Pro Antenna Cable Disconnect, Disconnect the antenna cable: étape 0, image 3 de 3
Disconnect the antenna cable

  • Insert one arm of a pair of angled tweezers under the metal neck of the black antenna cable coaxial connector, located on the top left corner of the logic board.

  • Gently lift straight up to disconnect the cable.

  • To reconnect the cable, hold the connector in place over its socket and press down with the flat end of a spudger—the connector should snap into place. If you're having trouble, don't try to force the connector over the socket. Reposition it and try again.

Antennenkabel abtrennen

Setze eine der Spitzen einer abgewinkelten Antenne unter das Metallende am Koaxialstecker des schwarzen Antennenkabels in der oberen linken Ecke des Logic Boards.

Hebe vorsichtig hoch, um das Kabel abzutrennen.

Um das Kabel wieder anzuschließen, musst du den Stecker über dem Anschluss ausrichten und mit dem flachen Ende des Spudgers nach unten drücken, er sollte dann einrasten. Drücke den Stecker nicht mit Gewalt ein. Richte ihn gegebenenfalls nochmals neu aus und probiere es erneut.

[title] Disconnect the antenna cable
-[* black] Insert one arm of a pair of angled tweezers under the metal neck of the black antenna cable [guide|25629|coaxial connector|stepid=64972|new_window=true], located on the top left corner of the logic board.
+[* black] Insert one arm of a pair of [product|IF145-020-5|angled tweezers] under the metal neck of the black antenna cable [guide|25629|coaxial connector|stepid=64972|new_window=true], located on the top left corner of the logic board.
[* black] Gently lift straight up to disconnect the cable.
-[* icon_reminder] To reconnect the cable, hold it in place over its socket and press down with the flat end of a spudger—the connector should snap into place. Don't try to force the connector into the socket. Reposition it and try again.
+[* icon_reminder] To reconnect the cable, hold the connector in place over its socket and press down with the flat end of a spudger—the connector should snap into place. If you're having trouble, don't try to force the connector over the socket. Reposition it and try again.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.