Réparez vos affaires Communauté Boutique

Extracción del conjunto de la placa principal

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 9 tutoriels qui comprennent cette étape.

Retourner au tutoriel
Anglais
Espagnol
Étape précédente Étape suivante

Traduction de l’étape 5

Étape 5
Right‑Side Inner Shell Removal, Disconnect the fan: étape 0, image 1 de 3 Right‑Side Inner Shell Removal, Disconnect the fan: étape 0, image 2 de 3 Right‑Side Inner Shell Removal, Disconnect the fan: étape 0, image 3 de 3
Disconnect the fan

  • Firmly grip the fan cables' white connector head and pull it straight up and out of its socket.

  • If you're having trouble, grip the cables just above the connector head, and gently pull.

  • During reassembly, align the connector over its socket and push down on the edges with the flat end of a spudger until it slides fully into its socket.

Desconecta el ventilador

Sujeta firmemente el cabezal del conector blanco de los cables del ventilador y tira de él hacia arriba para sacarlo de su zócalo.

Si tienes problemas, agarra los cables justo encima del cabezal del conector y tira suavemente.

Durante el reensamblaje, alinea el conector sobre su zócalo y presiona los bordes hacia abajo con el extremo plano de un spudger hasta que se deslice completamente en su zócalo.

[title] Disconnect the fan
-[* black] Firmly grip the fan cables white connector head and pull it straight up and out of its socket.
+[* black] Firmly grip the fan cables' white connector head and pull it straight up and out of its socket.
[* icon_note] If you're having trouble, grip the cables just above the [guide|25629|connector head|stepid=64977|new_window=true], and ''gently'' pull.
[* icon_reminder] During reassembly, align the connector over its socket and push down on the edges with the flat end of a spudger until it slides fully into its socket.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.