Réparez vos affaires Communauté Boutique

Remplacement du panneau arrière du Samsung Galaxy Tab 10.1

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 5 tutoriels qui comprennent cette étape.

Retourner au tutoriel
Anglais
Français
Étape suivante

Traduction de l’étape 1

Étape 1
Samsung Galaxy Tab 10.1 Rear Panel Replacement: étape 0, image 1 de 2 Samsung Galaxy Tab 10.1 Rear Panel Replacement: étape 0, image 2 de 2

  • Place the bottom of the tablet towards you.

  • Remove the 4.1mm screws near the charge port with a Tri-Wing screwdriver.

  • If there are plastic tabs covering these screws, use pointed tweezers to pry the tabs out.

  • On model GT-P7500, this step is omitted, as that model doesn't have these 2 screws.

Placez le bas de la tablette vers vous.

Retirez les deux vis de 4,1 mm près du port de charge avec un tournevis Tri-Wing.

[* black] Place the bottom of the tablet towards you.
-[* red] Remove the two 4.1 mm screws near the charge port with a Tri-Wing screwdriver.
+[* red] Remove the 4.1mm screws near the charge port with a Tri-Wing screwdriver.
+ [* black] If there are plastic tabs covering these screws, use [product|IF145-020-2|pointed tweezers] to pry the tabs out.
+ [* icon_note] On model GT-P7500, this step is omitted, as that model doesn't have these 2 screws.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.