Aller au contenu principal

iPad Air Wi-Fi フロントパネルの交換

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 76 tutoriels qui comprennent cette étape.

Anglais
Japonais

Traduction de l’étape 24

Étape 24
iPad Air Wi-Fi Front Panel Replacement: étape 0, image 1 de 3 iPad Air Wi-Fi Front Panel Replacement: étape 0, image 2 de 3 iPad Air Wi-Fi Front Panel Replacement: étape 0, image 3 de 3
  • Leave the pick from the last step in place to prevent the adhesive from re-sealing.

  • With a new pick, slice gently over the left-hand antenna, stopping before the home button.

  • Only slide the pick from the outer edge toward the center of the iPad. Do not move the pick back toward the outer edge, as moving in this direction may damage the antenna.

  • If you need to slide the pick over the lower section more than once, remove it and re-insert at the outer edge, and slide inwards.

  • Leave the pick in place before moving on.

接着剤が再付着しないように、開口ピックを左側下部の角に挟んだままにします。

新しいピックを手に取り、左側アンテナの上をゆっくりと滑らせます。ホームボタン手前で止めます。

iPadの中央に向けて、外側のエッジのみをピックでスライドさせます。中央から外側に向かってピックを戻さないでください。この方向に動かすとアンテナにダメージを与えてしまうことがあります。

開口ピックを2回以上スライドする必要がある場合は、左端外側から中央に向かってピックを再挿入して、作業を継続してください。

次の手順に移る前に、ピックを中央付近で挟んだままにします。

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.