Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 26 tutoriels qui comprennent cette étape.

Anglais
Italien

Traduction de l’étape 3

Étape 3
Use a the flat end of a spudger or a fingernail to carefully pop the two digitizer cable connectors straight up from their sockets. To avoid damaging your iPad, pry only on the connectors themselves, not on the socket on the logic board. To avoid damaging your iPad, pry only on the connectors themselves, not on the socket on the logic board.
  • Use a the flat end of a spudger or a fingernail to carefully pop the two digitizer cable connectors straight up from their sockets.

  • To avoid damaging your iPad, pry only on the connectors themselves, not on the socket on the logic board.

Usa l'estremità piatta di uno spudger o un'unghia per scollegare i due connettori dedel cavo del digitizer dai rispettivi zoccoli.

Per evitare danni al tuo iPad, fai leva solo sul cavo, non sul connettore della scheda logica.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.