Aller au contenu principal

Remplacement de la carte mère de l'iPad Air Wi-Fi

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 8 tutoriels qui comprennent cette étape.

Anglais
Français

Traduction de l’étape 24

Étape 24
iPad Air Wi-Fi Logic Board Replacement: étape 0, image 1 de 3 iPad Air Wi-Fi Logic Board Replacement: étape 0, image 2 de 3 iPad Air Wi-Fi Logic Board Replacement: étape 0, image 3 de 3
  • As you complete the next few steps, prying adhesive securing the logic board in place, always start by testing gently to see if the adhesive is softened. If not, reheat the iOpener and reapply it to the back of the rear case.

  • Carefully insert an opening pick under the logic board, between the front-facing camera and the battery.

  • Slide the pick toward the front-facing camera connector, and stop at the bend in the logic board.

Au fur et à mesure des prochaines étapes, testez doucement pour voir si l'adhésif adhérant à la carte mère est suffisamment ramolli. Sinon, réchauffez l'iOpener et réappliquez-le sur la coque arrière.

Insérez délicatement un médiator sous la carte mère, entre la caméra frontale et la batterie.

Faites glisser le médiator vers le connecteur de la caméra frontale et arrêtez-vous à l'angle de la carte mère.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.