Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 7 tutoriels qui comprennent cette étape.
Traduction de l’étape 1
Étape 1
-
Loosen the two #00 Phillips 4.2 mm-length screws located at the top of the back cover.
- | [* red] |
---|---|
- | [* |
+ | [* red] Loosen the two #00 Phillips 4.2 mm-length screws located at the top of the back cover. |
+ | [* icon_note] The screws have locking washers that prevent the screws from falling off of the back cover. Leave these locking washers on the screws; it is not necessary to remove the washers for this repair guide. |
Vos contributions sont faites dans le cadre de la licence open source Creative Commons.