Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront le tutoriel qui comprend ces étapes.
Traduction de l’étape 2
Étape 2
Remove yellow cables
-
Use a spudger tool to release the black clips on the two connectors holding the flat, yellow cable in place.
-
Use the tweezers to pull the flat, yellow cable out of its connectors.
-
Use the tweezers to disconnect the battery connector from the circuit board.
-
Using the spudger tool again, pry up and release the connectors at the ends of the flat, orange cable.
-
Remove the flat, orange cable.
Vos contributions sont faites dans le cadre de la licence open source Creative Commons.