Réparez vos affaires Communauté Boutique

Remplacement de l'ensemble LCD du MacBook Core Duo

Info : Vous modifiez actuellement une condition préalable du tutoriel que vous venez de consulter. Toutes les modifications affecteront les 14 tutoriels qui comprennent cette étape.

Retourner au tutoriel
Anglais
Français
Étape précédente

Traduction de l’étape 9

Étape 9
MacBook Core Duo LCD Assembly Replacement: étape 0, image 1 de 2 MacBook Core Duo LCD Assembly Replacement: étape 0, image 2 de 2

  • Be sure to keep track of the small magnet along the left side of the display. It may be stuck to the LCD frames or to the rear display bezel.

  • When the display lid is closed, this magnet comes in proximity to a sensor on a small circuit board at the bottom end of the I/O board, to tell the Macbook that the display has been closed, so that the Macbook can go into clamshell sleep mode.

  • To reinstall this magnet, press it back into its cavity in the rear display bezel, with its short side facing up (see photo 2), then place the LCD panel back into the rear display bezel and screw it down so that the magnet doesn't drop out and disappear.

Faites attention à ne pas perdre le petit aimant le long du côté gauche de l'écran. Il pourrait rester accroché au châssis du LCD ou au capot arrière de l'écran. Lors du montage, veillez à ce que le côté court soit orienté cers le haut.

-[* icon_reminder] Be sure to keep track of the small magnet along the left side of the display. It may be stuck to the LCD frames or to the rear display bezel. When installing it, be sure short side is facing upward.
+[* icon_note] Be sure to keep track of the small magnet along the left side of the display. It may be stuck to the LCD frames or to the rear display bezel.
+[* icon_note] When the display lid is closed, this magnet comes in proximity to a sensor on a small circuit board at the bottom end of the I/O board, to tell the Macbook that the display has been closed, so that the Macbook can go into clamshell sleep mode.
+[* icon_reminder] To reinstall this magnet, press it back into its cavity in the rear display bezel, with its short side facing up (see photo 2), then place the LCD panel back into the rear display bezel and screw it down so that the magnet doesn't drop out and disappear.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.