Aller au contenu principal

iPhone 6 Plus逻辑主板更换

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 3 tutoriels qui comprennent cette étape.

Anglais
Chinois

Traduction de l’étape 1

Étape 1
iPhone 6 Plus Logic Board Replacement: étape 0, image 1 de 1
  • Remove the following screws securing the logic board to the rear case:

  • Two 2.4 mm standoff screws

  • Standoff screws are best removed using a standoff screwdriver or bit.

  • In a pinch, a small flathead screwdriver will do the job—but use extra caution to ensure it doesn't slip and damage surrounding components.

  • One 2.1 mm Phillips #00 screw

拧下以下将主板固定在后壳上的螺丝:

2个 2.4mm 的压铆螺柱螺钉

你可以通过专用的压铆螺柱螺丝刀或螺丝刀组更轻松地卸下它们。

如果手头没有上述工具,也可以用平头螺丝刀来拧,但是要十分小心以避免损伤周围的原件。

一个2.1mm 飞利浦#00螺丝。

[* black] Remove the following screws securing the logic board to the rear case:
[* red] Two 2.4 mm standoff screws
- [* icon_note] Standoff screws are best removed using an [product|IF145-343|new_window=true] and [product|IF145-326|driver handle|new_window=true].
+ [* icon_note] Standoff screws are best removed using a [product|IF145-388-4|standoff screwdriver|new_window=true] or bit.
[* icon_caution] In a pinch, a small flathead screwdriver will do the job—but use extra caution to ensure it doesn't slip and damage surrounding components.
[* orange] One 2.1 mm Phillips #00 screw

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.