Aller au contenu principal
Anglais
Français

Traduction de l’étape 1

Étape 1
Lift the capacitor out and gently pull it away from the control board to unplug the ribbon attached to the side of the circuit board. Be careful not to bend the ribbon. Lift the capacitor out and gently pull it away from the control board to unplug the ribbon attached to the side of the circuit board. Be careful not to bend the ribbon. Lift the capacitor out and gently pull it away from the control board to unplug the ribbon attached to the side of the circuit board. Be careful not to bend the ribbon.
Flash Capacitor
  • Lift the capacitor out and gently pull it away from the control board to unplug the ribbon attached to the side of the circuit board. Be careful not to bend the ribbon.

Soulevez le condensateur et retirez-le doucement de la carte de commande pour débrancher le ruban attaché sur le côté de la carte de circuit imprimé. Faites attention de ne pas plier le ruban.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.