Info : Vous modifiez actuellement une condition préalable du tutoriel que vous venez de consulter. Toutes les modifications affecteront les 3 tutoriels qui comprennent cette étape.
Traduction de l’étape 2
Étape 2
-
Verify that the LCD screen is attached to the chip on the back on the camera.
-
Remove the dial from the back of the camera. It pops right off very easily.
-
Remove the screw using a Phillips #00 Screwdriver from the camera.
Vos contributions sont faites dans le cadre de la licence open source Creative Commons.