GoPro Hero3+ Black Edition Image Sensor Replacement

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 4 tutoriels qui comprennent cette étape.

Anglais

Chinois

Traduction de l’étape 1

Étape 1

Using your screwdriver, remove the four 8.1mm PH00 screws securing the motherboard to the black housing unit and set them aside.
Use the plastic opening tool to help pry the motherboard/midframe up from the main housing. Once you can get a hold of the edge, simply pull the internal components up and out!
Watch out for the ribbon cable connecting the midframe and the motherboard to the GoPro housing. See the next step.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.