Info : Vous modifiez actuellement une condition préalable du tutoriel que vous venez de consulter. Toutes les modifications affecteront les 5 tutoriels qui comprennent cette étape.
Traduction de l’étape 5
Étape 5
-
For the next connector, which is right next to the previous wire, there is a piece of tape attached to a metal bar.
-
Flip the metal bar over using the tape as a handle.
-
Next, grab onto the connector and slowly pull it from the socket in the logic board.
Vos contributions sont faites dans le cadre de la licence open source Creative Commons.