Aller au contenu principal

MacBook Pro (13 Zoll, Mitte 2010, Unibody) Display tauschen

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 2 tutoriels qui comprennent cette étape.

Anglais
Allemand

Traduction de l’étape 2

Étape 2
MacBook Pro 13" Unibody Mid 2010 Display Replacement: étape 0, image 1 de 1
  • Disconnect the camera cable by pulling the male end straight away from its socket.

  • Make sure to pull the connector parallel to the face of the logic board and toward the optical drive, not straight up from its socket.

Ziehe das Ende des Kamerakabels gerade aus seinem Anschluss heraus .

Achte darauf, dass du den Stecker parallel zur Oberfläche des Logic Boards zum optischen Laufwerk hin ziehst und nicht senkrecht vom Anschluss hoch.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.