Réparez vos affaires

Droit à la réparation

Boutique

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 25 tutoriels qui comprennent cette étape.

Retourner au tutoriel
Anglais
Chinois
Étape précédente

Traduction de l’étape 6

Étape 6
To install new rear glass: Use tweezers to peel away any remaining adhesive from the phone's chassis.

  • To install new rear glass:

  • Use tweezers to peel away any remaining adhesive from the phone's chassis.

  • Clean the adhesion areas with high concentration isopropyl alcohol (at least 90%) and a lint-free cloth. Swipe in one direction only, not back and forth. This will help prep the surface for the new adhesive.

  • Peel the adhesive backing off of the new rear glass, carefully line up one edge of the glass against the phone chassis, and firmly press the glass onto the phone.

  • If you're reinstalling the old rear glass, or using rear glass without adhesive pre-installed, follow this guide.

此时，后部玻璃面板应该完全从手机上分开。双面胶可能仍然会粘附在两侧上。

拉开后部面板，然后完全分离它们。

参考此指南以重新安装后部玻璃面板。

[* icon_note] At this point, theicon_reminder] To install new rear glass panel should be fully separatedglass:
[* black] Use tweezers to peel away any remaining adhesive from the body ofphone's chassis.
[* black] Clean the phone, althoughadhesion areas with high concentration isopropyl alcohol (at least 90%) and a lint-free cloth. Swipe in one direction only, not back and forth. This will help prep the adhesive strip may be attached to both sides.
[*surface for the new adhesive.
[* black] PullPeel the adhesive backing off of the new rear panelglass, carefully line up one edge of the glass against the phone chassis, and away to completely separate itfirmly press the glass onto the phone.
[* icon_reminder] Follow [guide|47490|this guide] to reinstallIf you're reinstalling the old rear glassglass, or using rear glass without adhesive pre-installed, follow [guide|47490|this guide|new_window=true].
[* icon_note] At this point, theicon_reminder] To install new rear glass panel should be fully separatedglass:
[* black] Use tweezers to peel away any remaining adhesive from the body ofphone's chassis.
[* black] Clean the phone, althoughadhesion areas with high concentration isopropyl alcohol (at least 90%) and a lint-free cloth. Swipe in one direction only, not back and forth. This will help prep the adhesive strip may be attached to both sides.
[*surface for the new adhesive.
[* black] PullPeel the adhesive backing off of the new rear panelglass, carefully line up one edge of the glass against the phone chassis, and away to completely separate itfirmly press the glass onto the phone.
[* icon_reminder] Follow [guide|47490|this guide] to reinstallIf you're reinstalling the old rear glassglass, or using rear glass without adhesive pre-installed, follow [guide|47490|this guide|new_window=true].

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.