Aller au contenu principal

Samsung Galaxy S6 Vervanging van de midframemodule

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 13 tutoriels qui comprennent cette étape.

Anglais
Néerlandais

Traduction de l’étape 2

Étape 2
Samsung Galaxy S6 Midframe Assembly Replacement: étape 0, image 1 de 3 Samsung Galaxy S6 Midframe Assembly Replacement: étape 0, image 2 de 3 Samsung Galaxy S6 Midframe Assembly Replacement: étape 0, image 3 de 3
  • Before you perform this step, make sure you've ejected the SIM card tray.

  • Firmly grasp the edge of the midframe assembly.

  • Lift up on the midframe assembly while pushing down on the battery to separate the midframe assembly from the rest of the phone.

  • While lifting the midframe, be careful to avoid snagging it on the audio jack or charging port.

  • Once the midframe is partially seperated, carefully run an opening pick around the edges of the rest of the phone to separate the top of the midframe.

  • Be careful not to accidentally insert the opening pick between the glass and display.

  • To avoid damage to the headphone jack, remove the top of the midframe first, then push the midframe downwards to disengage it from the headphone jack.

  • You may need to heat and apply an iOpener to the edges of the display to soften the display adhesive if midframe separation is difficult.

Zorg dat je de simkaarthouder, voordat je met deze stap begint, uit je toestel hebt verwijderd.

Pak een zijkant van de midframemodule stevig vast.

Til een kant van de midframemodule op terwijl je de batterij naar beneden duwt. Zo scheid je de midframemodule van de rest van de telefoon.

Wees, bij het optillen van het midframe, voorzichtig dat je deze niet breekt op de audiojack- of de oplaadpoort.

Als het midframe eenmaal voor een groot deel is losgekomen, schuif je je plectrum langs de zijkanten van de rest van de telefoon om de bovenkant van het midframe ook los te krijgen.

Wees voorzichtig en zorg dat je je plectrum niet per ongeluk tussen het glas en het scherm steekt.

Om te voorkomen dat je je hoofdtelefoonjack beschadigt, verwijder je eerst de bovenkant van het midframe en duw je het midframe vervolgens naar beneden om deze van de hoofdtelefoonjack los te maken.

Het kan, als het losmaken van het midframe te moeilijk blijkt, nodig en handig zijn om een iOpener te verwarmen en deze op de zijkanten van de telefoon te leggen om de lijm rondom het scherm genoeg te verzachten.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.