Aller au contenu principal

iPhone 6のフロントパネルアセンブリの交換

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 23 tutoriels qui comprennent cette étape.

Anglais
Japonais

Traduction de l’étape 13

Étape 13
iPhone 6 Front Panel Assembly Replacement: étape 0, image 1 de 2 iPhone 6 Front Panel Assembly Replacement: étape 0, image 2 de 2
  • Make sure the battery is disconnected before you disconnect or reconnect the cable in this step.

  • Use a spudger or a fingernail to disconnect the display data cable connector.

  • When reassembling your phone, the display data cable may pop off its connector. This can result in white lines or a blank screen when powering your phone back on. If that happens, simply reconnect the cable and power cycle your phone. The best way to power cycle your phone is to disconnect and reconnect the battery connector.

この手順でケーブルの接続を切ったり、再接続する前に、バッテリーの接続が切れていることを確認してください。

スパッジャーもしくは爪先を使って、ディスプレイデータのケーブルコネクタの接続を外します。

デバイスの再組み立ての際には、ディスプレイデータケーブルがコネクターから飛び出してしまうことがあります。これは電源を入れた時に白黒画面となる原因となります。この状態の場合、単純にケーブルを一旦外して電源を切り、再起動してください。ベストな再起動方法は、バッテリーコネクタの接続を一度外してから再装着して電源を入れることです。

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.