Aller au contenu principal

iPhone 6 Vervanging van de voorste paneelmodule

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 23 tutoriels qui comprennent cette étape.

Anglais
Néerlandais

Traduction de l’étape 13

Étape 13
iPhone 6 Front Panel Assembly Replacement: étape 0, image 1 de 2 iPhone 6 Front Panel Assembly Replacement: étape 0, image 2 de 2
  • Make sure the battery is disconnected before you disconnect or reconnect the cable in this step.

  • Use a spudger or a fingernail to disconnect the display data cable connector.

  • When reassembling your phone, the display data cable may pop off its connector. This can result in white lines or a blank screen when powering your phone back on. If that happens, simply reconnect the cable and power cycle your phone. The best way to power cycle your phone is to disconnect and reconnect the battery connector.

Zorg dat de batterij los is gekoppeld voordat je begint met het loskoppelen of weer aansluiten van de kabel in deze stap.

Gebruik een spudger of een nagel om de aansluiting van de schermdatakabel los te koppelen.

Bij het hermonteren van je telefoon kan het zijn dat de schermdatakabel loskomt van de aansluiting. Dit kan leiden tot witte lijnen of een zwart scherm bij het inschakelen van je iPhone. In dat geval moet je de kabel weer aansluiten en je iPhone "power cyclen", wat je kunt doen door de batterijaansluiting los te koppelen en weer aan te sluiten.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.