Aller au contenu principal
Anglais
Français

Traduction de l’étape 14

Étape 14
Secure the thermal sensor to the new hard drive. The original adhesive on the back of the thermal sensor should hold the sensor in place. Reuse the black tape from the old drive to secure the thermal sensor wire to the new drive. Your newly-installed drive should look very similar to the third picture.
  • Secure the thermal sensor to the new hard drive. The original adhesive on the back of the thermal sensor should hold the sensor in place.

  • Reuse the black tape from the old drive to secure the thermal sensor wire to the new drive.

  • Your newly-installed drive should look very similar to the third picture.

Insérez ici votre traduction

Insérez ici votre traduction

Insérez ici votre traduction

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.