Aller au contenu principal

Reemplazo de tornillos iphone 7 plus

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 17 tutoriels qui comprennent cette étape.

Anglais
Espagnol

Traduction de l’étape 1

Étape 1
iPhone 7 Plus Pentalobe Screws Replacement: étape 0, image 1 de 1
  • Before you begin, discharge your iPhone battery below 25%. A charged lithium-ion battery can catch fire and/or explode if accidentally punctured.

  • Power off your iPhone before beginning disassembly.

  • Remove the two 3.4 mm pentalobe screws at the bottom edge of the iPhone.

  • Opening the iPhone's display will compromise its waterproof seals. Have replacement seals ready before you proceed past this step, or take care to avoid liquid exposure if you reassemble your iPhone without replacing the seals.

Antes de comenzar, descarga la batería de tu iPhone por debajo del 25%. Una batería de litio cargada puede prenderse fuego y/o explotar si se la pincha accidentalmente.

Apaga tu iPhone antes de comenzar el desmontaje.

Retira los dos tornillos pentalobe de 3,4 mm del borde inferior del Iphone.

Abrir la pantalla del iPhone pondrá en peligro sus sellos a prueba de agua. Ten especial cuidado de no exponer tu iPhone a daños por líquidos después de completar su reparación.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.