Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront le tutoriel qui comprend ces étapes.
Traduction de l’étape 2
Étape 2
-
Now turn your attention to the camera sensor and battery housing. Identify the two connection points of the large ribbon cable.
-
Carefully place a flathead screwdriver under the left ribbon cable connection point and pull up to disconnect.
-
Repeat the previous step but this time carefully remove the right ribbon cable connection point.
-
After both sides of the ribbon cable have been disconnected it is ready to be replaced.
Vos contributions sont faites dans le cadre de la licence open source Creative Commons.