Info : Vous modifiez actuellement une condition préalable du tutoriel que vous venez de consulter. Toutes les modifications affecteront les 37 tutoriels qui comprennent cette étape.
Traduction de l’étape 2
Étape 2
-
Remove the following three screws securing the left fan to the logic board:
-
One 4.4 mm T5 Torx screw with 2 mm collar
-
One 5.0 mm T5 Torx screw with 2 mm collar
-
One 3.9 mm T5 Wide Head Torx screw
| [* black] Remove the following three screws securing the left fan to the logic board: | |
| - | [* red] One 4.4 mm T5 Torx screw |
| - | [* orange] One 5.0 mm T5 Torx screw with 2 mm collar |
| + | [* red] One 4.4 mm T5 Torx screw with 2 mm collar |
| + | [* orange] One 5.0 mm T5 Torx screw with 2 mm collar |
| [* yellow] One 3.9 mm T5 Wide Head Torx screw | |
| + | [* icon_note] When reinstalling the fan and its screws, don't fully torque the screws until you've first installed all of them loosely, so that the fan can move a little and position itself properly as you insert the screws into their threaded standoffs. |
Vos contributions sont faites dans le cadre de la licence open source Creative Commons.