Réparez vos affaires Communauté Boutique

Reemplazo de la cámara frontal del LG V20

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 7 tutoriels qui comprennent cette étape.

Retourner au tutoriel
Anglais
Espagnol

Traduction de l’étape 1

Étape 1
LG V20 Front Facing Camera Replacement: étape 0, image 1 de 2 LG V20 Front Facing Camera Replacement: étape 0, image 2 de 2

  • Use the flat end of a spudger to disconnect the front camera flex cable.

  • If you want to go on and remove the motherboard assembly, there is no need to remove the front facing camera after disconnecting it. However if you feel uncertain, carefully remove it with a pair of tweezers.

  • Use a pair of tweezers to carefully remove the front facing camera. Be careful to only grip the body of the camera, as the top is the sensor pcb and is only held on with glue (removal will ruin the sensor).

Usa el extremo plano de un spudger para desconectar el cable flexible de la cámara frontal.

Si quieres continuar y remover el ensamblaje de placa madre, no hay necesidad de remover la cámara frontal luego de desconectarla. Sin embargo, si no estás seguro, con cuidado remuévela con un par de pinzas.

Usa un par de pinzas para remover la cámara frontal.

[* black] Use the flat end of a spudger to disconnect the front camera flex cable.
- [* icon_note] If you want to go on and remove the motherboard assembly, there is no need to remove the front facing camera after disconnecting it. However if you feel uncertain, carefully remove it with a pair of tweezers.
-[* black] Use a pair of tweezers to carefully remove the front facing camera.
+ [* icon_note] If you want to go on and remove the motherboard assembly, there is no need to remove the front facing camera after disconnecting it. However if you feel uncertain, carefully remove it with a pair of [product|IF145-020|tweezers].
+[* black] Use a pair of tweezers to carefully remove the front facing camera. Be careful to only grip the body of the camera, as the top is the sensor pcb and is only held on with glue (removal will ruin the sensor).

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.