Questions de supportPoser une question
Il n'y a pas encore de questions. Soyez le premier à poser une question !
Background and Identification
The Eddy Floor Scraper model NS2010 is a multi-purpose floor scraper that can be used to remove carpeting, under-padding, vinyl tiles, glue, and parquetry. It features a compact design that is meant to allow users to scrape flooring in confined spaces and on stairs. The floor scraper weighs 25 pounds including its handle. Its blades can be removed and replaced when they become dull. The NS2010 model was sold in 110-Volt and 220-Volt options. Before connecting the floor scraper to a power source, make sure that the voltage supplied is the same as the one specified on the nameplate of the tool. Connecting the tool to a higher or lower voltage source can damage the motor or injure the user.
The NS2010 model floor scraper has a scraping width of either 5.5 inches or 9 inches and has an overall length of 14.5 inches. Different sized blades can be used for different applications, and a parquetry blade can be used for parquetry removal. With no load, it operates at 5800 revolutions per minute. Before use, the floor scraper should be checked for misalignment or binding of moving parts, breakage of parts, and other conditions that might affect the tool’s operation.
The NS2010 model floor scraper includes a cylindrical motor casing, a long handle, and a flat portion that rests on the ground. It includes the model name “NS 2010” on the front of the cylindrical portion of the tool.
Scraping Width: 5.5” and 9”
No Load Speed: 5800 RPM
Overall Length: 14.5”
Net Weight: 25 lbs.
Power Supply: 120 Volts, 5 Amps, 60 Hz; 220 Volts, 5 Amps, 50 Hz
Vibrations Level: 2.5