2 diagrammes
Questions populaires sur le forum
Poser une questionIl n'y a pas encore de questions. Soyez le premier à poser une question !
Modèles
07004, 7004
Background and Identification
The Hiretech Floor Sander model 07004 (also called the HT7) is a disc floor sander/edger that is marketed towards professional users. The HT7 is designed to produce score-free finishes on soft and hardwood floors that require leveling and sanding. The HT7 can also be used on some types of decking, fiberboard, cork, composition, and engineered floors. This model is designed for confined areas such as stair treads, closets, and edges of floors. The sander includes a disc guard with bronze inserts that are designed to prevent damage to baseboards, skirting, and moldings.
The HT7 floor sander includes an ON/OFF switch that is biased to the off-side to prevent accidental start-up. It features a 1.5-horsepower brush motor and a seven-inch metal-backed sanding pad. The sander includes an integrated dust bag and a high-powered vacuum system to collect debris from sanding. The machine also includes storage for a wrench for removing and replacing the sanding pad. The sander vibrates at 2.71 meters per second and the motor operates at 13,000 revolutions per minute. The sander’s disk sands at a rate of 3,300 revolutions per minute.
Hiretech recommends using this sander with P24 to P120 grit sanding pads that are aluminum oxide or silicon carbide with bonding resin over resin with antistatic additives. The sander has a stainless-steel-colored body with black handles.
Technical Specifications
Model: HT7-2
Product Codes: 07003 (220/240V), 07004 (110/120V)
Power Supply:
- 220/240V 50/60Hz
- 110/120V 50/60Hz
Off Load Current:
- 220/240V = 5A
- 110/120V = 8A
Average Load Current:
- 220/240V = 8A
- 110/120V = 15A
Noise: 100 dBA at 1 meter (3'2")
Vibration: 2.71 m/s2 rms
Switch: Bias off, double pole with power connected indicator light.
Motor: Continuous heavy-duty AC/DC self-cooling 4 brush motor.
Motor RPM: 13,000RPM
Disc RPM: 3,300RPM
Sanding Disc: 178mm (7") dia. metal-backed and rubber bonded high-performance sanding pad.
Drive: Hardened steel alloy pinion and large diameter phosphor bronze drive gear.
Dust Pickup: Seated oversize alloy vacuum fan. Disposable paper dust bag or cloth bag.
Moving Parts: Sealed for life ball bearings.
Guards: High impact injection-molded ABS with a bronze bush.
Abrasives: 178mm (7") dia x 22mm (7/8") dia slotted center hole Recommended grit P24 to P120. Recommended type aluminum oxide or silicon carbide, backing E or F weight paper, bonding resin over resin with antistatic additives.
Power Cable: 7m (23') Non-marking outer insulation.
Dimensions: 276mm x505mm x 325mm (10.8" x 19.9" x 12.8") (width x depth x height)
Weight Net: 16.4kg (36.2lbs)
Warranty: 2 years
Approvals:
- CE (220/240V)
- CE (110/120V)
- CSA/C US (110V North America)
