Aller au contenu principal

Tu trouveras les réponses dans ce document

On a lu toutes les pages de 110 pour que tu n'aies pas à le faire. Pose ta question et obtiens la réponse tout de suite.

Dell PowerEdge T410 Systems Getting Started With Your System

User guide 110 pages · 2.74 MB · PDF

Dell™ PowerEdge™

T410 Systems

Getting Started With Your System

Začináme se systémem

Guide de mise en route

Erste Schritte mit dem System

Τα πρώτα βήματα με το σύστημά σας

Rozpoczęcie pracy z systemem

Начало работы с системой

Procedimientos iniciales con el sistema

กวายทุก ๑๒ กาแฉก ก๒๖๗

DELL™

DeII™ PowerEdge™

T410 Systems

Getting Started

With Your System

Model E08S

DELL™

Notes, Cautions, and Warnings

NOTE: A NOTE indicates important information that helps you make better use of your computer.

△ CAUTION: A CAUTION indicates potential damage to hardware or loss of data if instructions are not followed.

WARNING: A WARNING indicates a potential for property damage, personal injury, or death.

Model E08S

Installation and Configuration

Image

△!

WARNING: Before performing the following procedure, review the safety instructions that came with the system.

Stabilizing the Tower System

Image

△!

WARNING: The tower system has four feet on its bottom panel that can be extended outward to help properly stabilize the system. Failure to extend the feet poses the risk of having the system tip over, possibly causing bodily injury or damage to the system.

Image

U

Optional – Connecting the Keyboard, Mouse, and Monitor

Image

0 0 0 0

Connect the keyboard, mouse, and monitor (optional).

The connectors on the back of your system have icons indicating which cable to plug into each connector. Be sure to tighten the screws (if any) on the monitor's cable connector.

Connecting the Power Cables

Image

1

Connect the system's power cable(s) to the system and, if a monitor is used, connect the monitor's power cable to the monitor.

Installing the Power Cord Retention Bracket

Image

はっきり

Attach the power cord retention bracket on the right bend of the power supply handle. Bend the system power cable into a loop as shown in the illustration and attach to the bracket's cable clasp.

Plug the other end of the cable(s) into a grounded electrical outlet or a separate power source such as an uninterrupted power supply (UPS) or a power distribution unit (PDU).

Turning On the System

Image

🌙

Press the power button on the system. The power indicator should light.

Complete the Operating System Setup

If you purchased a preinstalled operating system, see the operating system documentation that ships with your system. To install an operating system for the first time, see the installation and configuration documentation for your operating system. Be sure the operating system is installed before installing hardware or software not

Rejoignez iFixit gratuitement pour lire le tutoriel complet (110 pages)

Nous demandons de créer un compte gratuit pour nous aider à bloquer les bots et à préserver iFixit pour la communauté.

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 1

Total : 1