Trademarks:
Canon Inc.'s trademark, logos, product names, service marks and those trademark, logos, product names, service marks licensed to Canon Inc. by any of its affiliate or subsidiary are registered or unregistered marks of Canon Inc. or such affiliate or subsidiary in Japan and/or other countries.
Adobe, the Adobe logo, Acrobat, the Acrobat logo and Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States of America and/or other countries.
All other trademarks, product names, service marks are generally either registered or unregistered marks of their respective owners.
Copyright:
All copyrights in the content of this Service Manual are owned or controlled by Canon Inc. You are not permitted to copy, reproduce, download, modify, adapt or translate in any way the content of this Service Manual for any purpose other than the purpose contemplated herein without prior written consent of Canon Inc.
For CA, USA only Included lithium battery contains Perchlorate Material - special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate/ for details.
DISASSEMBLY
CONTENTS
| 1. Before Starting the Repair Work --- 1 | |
|---|---|
| 1.1 | Precautions on Flash High Voltage Circuit --- 1 |
| 1.2 | List of Tools --- 1 |
| 1.3 | List of Supplies --- 1 |
| 1.4 | Connectors for FPC Board --- 2 |
| 2. Disassembling / Reassembling ---3 | |
| 2.1 | Procedure --- 3 |
| 2.2 | Disassembly of BATTERYCOVER/DC COVER --- 4 |
| 2.3 | Disassembly of REAR COVER UNIT/SIDE COVER ---6 |
| 2.4 | Disassembly of CROSS KEY UNIT/ANALOG KEY --- 8 |
| 2.5 | Disassembly of FRONT COVER UNIT--- 10 |
| 2.6 | Disassembly of LCD UNIT --- 12 |
| 2.7 | Disassembly of TOPBASE UNIT --- 14 |
| 2.8 | Disassembly of OPERATION FPCASS'Y --- 16 |
| 2.9 | Disassembly of MAIN PCB--- 20 |
| 2.10 | Separation of FLASH UNIT/OPTICAL UNIT --- 22 |
| 2.11 | Disassembly of MAIN CHASSIS UNIT --- 24 |
| 2.12 | Disassembly of OPTICAL UNIT--- 26 |
| 2.13 | Disassembly of BARRIER COVER --- 30 |
| 2.14 | List of Screws --- 33 |
Table Caption: This table outlines a repair manual for a device, detailing preliminary precautions, necessary tools and supplies, and a comprehensive step-by-step disassembly and reassembly procedure for various components, along with a list of screws used.
1. Before Starting the Repair Work
Be sure to read the following precautions before starting the repair work.
1.1 Precautions on Flash High Voltage Circuit
- After the FRONT COVER UNIT is removed, be sure to discharge the main capacitor. (Discharging resistor: 1 k Ω , approx. 5 W.)
- First contact the GND terminal of the main capacitor with the discharging resistor. Then contact the positive terminal of the main capacitor.
CAUTION:
Be careful of electric shock because the circuit is a high voltage circuit.
1.2 List of Tools
The following tools are used for the re-assembling during service.
List of tools
| New | Name of tools | Part No. | Remarks |
|---|---|---|---|
| Screwdriver (Local Purchase) | |||
| Tweezers (Local Purchase) |
**Table Caption: This table lists two tools, a screwdriver and tweezers, both to be purchased locally, with no part numbers or further
