M5 Quick Reference Guide

Quick Reference Guide

Getting Started

New Patient

1. Press [Patient], fill in basic patient information.

2. Press [Exam].

3. Move [Trackball] to choose probe and exam mode.

Scanning

B Mode

1. Press [B] to enter B mode.

2. Rotate [Gain & iTouch] knob to adjust gain.

CDFI/Power Mode

1. Press [Color] to enter Color mode.

2. Move [Trackball] to change the position of ROI.

3. Press [Set], and then move [Trackball] to change the size of ROI, press [Set].

PW/CW Mode

2. Move [Trackball] to change the position of sample volume.

3. Use related [Function Key] to change the size and angle of sample volume, press [Update] or [PW] to get the Pulse Wave Doppler.

Image Adjustment

Freq 7.5MHz Beam Off Focus Position Dynamic Range 83 FOV W Tail Off Gray Map Map7 Focus Number 1 9 Stem Traperald Off

The [Soft Key] is corresponding to the soft menu. Use left/right keys to switch the modes, use up/down keys to choose parameters and turn pages up or down.

The parameters in B mode: Frequency, iBeam, Focus Position, iClear, ExFOV, Line Density, Gray Map, Focus Number, Colorize, FOV, iTouch, Persistence, L/R Flip, Colorize Map, Dynamic Range, Acoustic Power, IP, U/D Flip, Magnify, FOV position.

The parameters in Color mode: Scale, Flow State, WF, Invert, Packet Size, Frequency, Priority, Baseline, Line Density,