Camera Bracket Replacement
2 pages · 49.20 KB · PDF
Roku Indoor Camera 360 SE (CP1000X) - Camera Mounting Bracket Replacement
Introduction
This guide covers removing the plastic mounting bracket that holds the camera assembly to the base. This must be done before the camera board can be removed.
Prerequisites
-
Complete the Back Panel Replacement guide first.
-
Complete the Camera (Tilt) Motor Replacement guide first.
What you need
Small Phillips screwdriver
Step 1 - Remove the bracket screws
The plastic camera mounting bracket is secured with 2 screws. Remove both screws.
Rejoignez iFixit gratuitement pour lire le document complet (2 pages)
Nous demandons de créer un compte gratuit pour nous aider à bloquer les bots et à préserver iFixit pour la communauté.
