Introduction
This guide shows how to remove and replace the batteries in your iFixit multimeter.
The multimeter uses two AAA batteries. Replace both batteries together to prevent the multimeter from draining them unevenly.
Ce dont vous avez besoin
-
-
Turn off your multimeter.
-
Disconnect the probes from your multimeter.
Demander à FixBot
-
-
-
Flip the multimeter over so that the kickstand side is facing up.
-
Swing the kickstand up all the way.
-
-
-
-
Use a Phillips screwdriver to loosen the single screw securing the battery cover.
-
-
-
Swing the bottom edge of the battery cover out from the multimeter.
-
Lift and remove the battery cover.
-
To reassemble your device, follow these instructions in reverse order.
For more information on how to use your iFixit multimeter, check out this page.
Annulation : je n'ai pas terminé ce tutoriel.
4 autres ont terminé cette réparation.
