Réparez vos affaires Communauté Boutique

13" aluminum unibody, 2.0 or 2.4 GHz Core 2 Duo processor.

574 questions Voir tout
Question close

Options

Keyboard Ribbon not locking in.

I had issues with my trackpad the left half was not clicking smoothly when i would click So i took my computer apart way more than i needed to but when i go to disconnect the keyboard ribbon i did not unlatch it first it was a bit hard but it did come out. Now when i try to put it back in and lock it i can just touch it and it come out. Its so loose i am not able to turn my computer on, i think, because of this.

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Oui Non
Indice 0
1 commentaire

Its no longer locking the ribbon i can take it out as if it was unlatched

par

Ajouter un commentaire

1 Réponse

Filtrer par :
Les plus utiles Les plus récentes Les plus ancien(ne)s
Solution retenue

Options

There is a small latch on the rear (facing the display side of your machine) black connector that you plug the keyboard into on the logic board. Carefully lift it and insert the keyboard cable. After the cable is seated lock it back in place. Hope this helps.

Cette réponse est-elle utile ?

Oui Non
Indice 1

4 commentaires:

I have but it doesn't stay in. I tap it and it will pop out even when locked.

par

It isn't being pushed in far enough. These cables are a little tricky to work with. You'll need a little leverage to ensure it has been pushed in. You shouldn't see any copper if it's seated properly.

par

That did it it wasn't in all the way it took more force to put it in there than i thought. Thank you very much!

par

Glad I could help!

par

Ajouter un commentaire
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 342