Rep: 13
1
1
MacBook Pro 17" Unibody Late 2011I
ve noticed after having my macbook over a year even though I take very good care of it the power button no longer sits flush and sometimes get stuck at an angle. It works but does not sit flush like it is supposed to. I searched this site and also google but no luck. Anyone know how to fix this?
Cette question est-elle utile ?
Rep: 685,3k
3,4k
1,1k
2,6k
There are two black Phillips screws holding the plate backing the button in place. Remove them and reseat the button. It's just hold in place by the back plate and a lip around the back of the button, note the position of the tab which keeps it straight. Just don't damage the printed circuit it pushes into. If you need a photo of this, just ask.
Cette réponse est-elle utile ?
Rep: 116,3k
66
68
359
A DIY repair of the button, to return some of the "spring" or a DIY replacement of a better button from a top case with other defects are about your choices.
Good Luck,
If this answer is acceptable please remember to return and mark it.
Cette réponse est-elle utile ?
Dernières 24 heures : 2
7 derniers jours : 2
30 derniers jours : 3
Total : 1,078
