Aller au contenu principal

27" display with 2560 x 1440 pixels resolution Thunderbolt & MagSafe cable attachments

Questions au sujet de 99 Voir tout

buzzing / Noise. Power supply issue?

Hi.

A friend have a problem with his 27" Thunderbolt display. Is it really annoying buzzing sound. My first guess would be the power supply??

The display in functioning OK, but that noise is killing the entire office.

How is the front glass attached? Glue? Can't see that in the break down guide.

Anyone else seen this?

Thanks

Here is a video of the issue.

YOUTUBE Video

Une réponse ! View the answer J'ai le même problème

Cette question est-elle utile ?

Score 3

Commentaires:

Check this teardown on how to get inside.

par

Ajouter un commentaire

Fix Kits pour batterie de MacBook

À partir de $69.99

Buy Now

Fix Kits pour batterie de MacBook

À partir de $69.99

Buy Now

3 réponses

Solution retenue

Do you live near rattle snakes ;-}

Sadly, you guessed it, the power supply is starting to fail.

Is it still covered under warranty? I would still try an AppleStore first as they may have an extended warranty program for this problem.

Cette réponse est utile ?

Score 4

Commentaires:

Sadly the warranty expired just a few months ago. Does anyone know where I can get a new power supply? At first I will try the local Apple repair shop.

Thanks.

par

What happens when the power supply fails with these symptoms? I have one failing and after opening it up and powering it on with my ear next to the power supply board it appears to be coming from the solenoids. Will I be able to order replacement solenoids and will soldering them on be possible?

par

Power supplies don't have solenoids. They do have transformers, coils, and capacitors which can fail.

These power supplies are not really repairable. Best just to replace the complete assembly. But before you do that did you check the voltages?

par

Whoops, thanks for the correction. I think I meant inductors or "chokes", which might be what you mean by "coils".

Are you sure the capacitors aren't replaceable? I'm fairly handy with a soldering iron and would rather give it a try before spending $150 on a new PSU board.

If I wanted to check the voltages, where would I connect the multimeter probes and what numbers am I looking for?

par

The problem is no one has schematics or board views for the power supplies. So you'll have a hard time diagnosing what truly failed.

The other problem is some of the components are hard to find so you run the risk of getting in over your head with costs and still no farther along.

Really, its cheaper just to replace the whole unit than spending the effort.

par

Ajouter un commentaire

Charge your macbook with it's own power cable, don't use the thunderbolt display's magsafe cable. By using the independent cable charger to plug my laptop it completely stopped the noise of the thunderbolt screen.

Cette réponse est utile ?

Score 0
Ajouter un commentaire

This issue can also be the EMI filter. This is the actual AC inlet. There are also capacitors and other passive components inside here. If the earth lead from this is also not firmly connected you may get the same buzz shown in this video. Otherwise as others have noted, it is the power supply. You can solve many buzzing issues with reapplication or additonal application of neutral cure silicone or potting compound. You will find quite a bit on there already (those white globs). Just add some more around the transformers, between any larger capacitors that might likely be vibrating against each other. Dont use acidic cure silicone or you will corrode the insides of the machine!

Cette réponse est utile ?

Score 0
Ajouter un commentaire

Ajoutez une réponse

Klaus M sera éternellement reconnaissant.
Voir les statistiques:

Dernières 24 heures : 3

7 derniers jours : 25

30 derniers jours : 176

Total : 6,929