Logic board fuse blown
Hello i think i must have blown that fuse those two screws is there a way to fix it
Cette question est-elle utile ?
Indice
-1
204486
1 Réponse
Solution retenue
Rep: 783,7k
1,1k
894
2,3k
Mtaka, that is a Diode. It is a RCLAMP2402B diode and can most likely be replaced. If you have never soldered an SMD device, you could just replace the MagSafe DC in board. runs around $10 to $15USD board
Cette réponse est-elle utile ?
Indice
1
...and many pins seems to be damaged on the LVDS socket. Could you post a close up pict of this socket and the LVDS cable connector end ?
